1/2" ID x 10' 4200 PSI Pressure Wash Jump Whip Hose 1/2” x 1/2” MPT Ends SWITCHES *****Add a note at checkout

*****Add a note at checkout indicating that ends should both be 1/2" MPT

model c038-sqk-sske-s70

***All fittings should be installed using non-drying liquid Teflon such as RectorSeal t plus 2 (can be purchased at any hardware store in the plumbing section) never use Teflon tape on anything in these related industries

Never use Teflon tape on your high pressure fittings

1 7/8" 1 hole

1/2" ID x 10' 4200 PSI Pressure Wash Jump Whip Hose 1/2” x 1/2” MPT Ends SWITCHES *****Add a note at checkout1 2" ID x 10' 4200 psi high pressure hose for 8 gpm and higher pressure washers R2 (two wire hose To move faster surface cleaning with your 8 gpm+ pressure washer, use this 1 2" ID hose from your unloader to your reel. Do you know that at 8 gpm, you lose 300 psi every 300 psi every 100 of 3 8 ID hose? That does not include every single fitting, quick connect, the hose reel, the reel swivel, the gun, ball valve and the depressions in your hose from