3/8" ID x 10' Flexible Rubber Air Hose 300 PSI 1/4" MPT x 1/4" MPT CYLINDER HEAD Fill the crankcase to dot

Fill the crankcase to dot on the oil gauge window per specifications with nondetergent SAE 30w oil

Simply remove your old pump and slide this PMR onto the shaft of your electric motor or gas engine

Kit 166 Packing Assy

Do not hard pipe plumb this filter

1" FPT polypropylene bulkhead for tank pipe thread connection this is commonly used on the inlet of the Hudson or a pressure washer supply tank

3/8" ID x 10' Flexible Rubber Air Hose 300 PSI 1/4" MPT x 1/4" MPT CYLINDER HEAD Fill the crankcase to dot3 8" ID x 10' flexible rubber air hose 300 psi 1 4" MPT x 1 4" MPT (Suitable for 1 2 ALL Flo, Yamada, ARO, Ingersoll Rand, 1 2" air diaphragm pump or pump with a 1 4" air port). If your pump has a 1 4" port, always upsize the air hose id at least one size up. We recommend a desiccant filter after the regulator and before the pump. Straight end and elbow end. Install the elbow end at the pump. Hose is 10' in length. SKU: HA06 10