Tork Craft | Annular Hole Cutter HSS 44 X 30mm Broach Slugger Bit Festool_Domino 000bpm Rated speed 740 /

000bpm Rated speed 740 / 1

chip extraction

Dust Extraction Splice Coupling

DEEP CLEANING

Sand carefully before application starting with a coarse paper – final sanding for flooring should be with a P120 – P150 grit paper

Tork Craft | Annular Hole Cutter HSS 44 X 30mm Broach Slugger Bit Festool_Domino 000bpm Rated speed 740 /Annular Hole Cutter HSS 14 X 30mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these